Are you caught in the selection of these lampblack machines?
A misunderstanding: “ circular air inlet, air inlet can 360°
The stove stove two generated fume distribution on both sides, and the center position of the smoke inlet, can only guarantee from the center of the nearest smoke into the full range, the distance of the smoke is easy to escape, so the air inlet is 360° 360° open design, not all of the tobacco into.
Misunderstanding two: “ the greater the air, smoke the better
The effect of smoking can not be determined only by air quantity. Excessive air flow not only can not absorb lampblack, but also disturbs the flow direction of lampblack gas. And theoretically, the fan air flow and noise is a pair of natural contradiction, the air flow over the big, but cause intolerable noise.
Misunderstanding three: “ oil net is more clean and
Side suction close smoking, contact oil earlier, gas oil contact to the oil network began to freeze into liquid, when the oil drops to a certain extent, smoke can no longer pass. Therefore, the technical experts in order to change the oil network worries, developed “ three heavy oil fume separation technology ” oil free network design, filter oil fumes through multi layer technology.
Misunderstanding four: “ free washable side suction machine can really free washable
The real smoke separation by using centrifugal force generated by the high-speed rotation of the impeller to separate the fumes, a strainer as thousands of smoke, is clearly impossible, only with better fan anti oil coating and good maintenance to ensure long-term efficient operation of lampblack machine.
Error five:
The best material in China is imported M-Cr refined steel material, anti-oxidation, corrosion resistance, and will be more shiny, distinguish when remember that the magnet can not suck, is the fine steel material. There is also a panel is protected by a Teflon coating, with non stick oil corrosion resistance and other advantages of easy cleaning, in addition to another excellent stainless steel plate material.
Misunderstanding six: cavity design is not important: The design of the inner cavity of the range hood, on the one hand, should be as seamless as possible, easy to clean, but also to protect the line, so that a variety of lines in the oil fumes under such strong corrosion conditions can work properly, not corrosion.
